Outdoor Hardscape Neon LED Strip Light, 12V AC/DC, IP67 Waterproof, 6 Feet With 12 Mounting Plates, Red Color

$59.99

Exclusive 12V AC or DC
Can be easily cut every 1.6 inches
Waterproof IP67
Green Color
Perfect for outdoor steps, walls, planters, BBQ areas, fire pits, fireplaces and outdoor kitchens
12 mounting plates for versatile installation
Can be powered with low voltage – 9V-17V
9 watts, 63 lumens.
3 years warranty

Color Temperature: Red

Add $100.00 or more to cart and get free shipping!

In stock

Add to wishlist

Description

Low Voltage AC/DC Compatibility – This innovative neon LED strip light is designed to work with your existing 12V AC landscape transformer, making it incredibly versatile. What sets it apart is its ability to be powered by either a 12V AC or DC transformer. The 6-foot neon strip includes a 3-foot lead wire on both ends, allowing you to link up to 3 strip lights (or 6 when powered from both sides).
Cuttable Design – This neon LED strip light can be easily cut every 1.6 inches, allowing for a perfect fit with your hardscape elements. Clearly marked cutting points on the strip ensure that the light continues to function seamlessly after trimming to your desired length.
Weatherproof & Durable – The Lumengy hardscape neon strip light is rated IP67, providing full protection from harmful dust and making it suitable for wet environments. Built with a durable silicone construction, it is weather-resistant, heatproof, and safe for both indoor and outdoor use. You can install it near water sources, such as pools, decks, walls, steps, and any outdoor element you want to highlight (though it should not be submerged).
Wide Usage – Perfect for outdoor steps, walls, planters, BBQ areas, fire pits, fireplaces, and outdoor kitchens. Since it works with your existing landscape transformer and low-voltage network, you can easily install it on your roof, walls, decks, trees, or any outdoor feature. Just tap into your existing line, and it’s ready to go.
Replacements – Lumengy offer 30 days return and 3 years replacement service in case any issue.
Package Includes – 6 feet Neon strip lights with 3 feet lead wire in both sides, 4 aluminum different mounting brackets (3 each) and screws for versatile installation
Transformer– This product requires a non-dimmable 9v-17v AC/DC transformer (not Included)

Additional information

Weight	1 lbs
Dimensions	0.78 × 7 × 0.78 in
Fixture Angle	Fixed
Color Temperature	Red
Quantity	1 Pack
Fixture Size	6 Feet
Watts	9 Watts
Certification	ETL
Fixture Color	White
Fixture Material	Silicon
Lumens	405 Lumens
Voltage	9V-17V AC/DC
Waterproof Rating	IP-67
Warranty	3-Year Replacement Warranty
Recommended For	Ceiling Mounting , Deck Steps , Large Steps , Long Wall , Outdoor Steps , Paver Steps , Retaining Wall , Under Cap Mounting , Wall Mounting , Wood Deck

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Outdoor Hardscape Neon LED Strip Light, 12V AC/DC, IP67 Waterproof, 6 Feet With 12 Mounting Plates, Red Color”

Installation

INSTALLATION INSTRUCTIONS FOR FALCON LIGHTS

Before installing paver lights, you will need:

1. 12V Transformer (not included) - A low-voltage landscape transformer is required to power these lights. It reduces the standard high-voltage 110V in your home to 12v, an easy-to-use and safe voltage. We recommend using 12V AC, although our lights can work with 9v-17v AC or DC.

2. Main low-voltage cable (not included) - This cable runs from the transformer to the last light in your line. We suggest using a thick cable, such as 10/2, 12/2, or 14/2 (10/2 is the thickest). Each hardscape light comes with a 10-foot lead wire to connect to the main line. If the lead wire is not long enough, use 16/2 or 14/2 wire to extend it to the main line.

3. Waterproof wire connectors (included) - Use the 2 included waterproof wire connectors to connect the hardscape light's lead wire to the main low-voltage line.

Lumengy Falcon lights comes with 3 mounting plates allowing you endless installation options, weather you need to light steps, walls, retaining walls, eves, or any outdoor down light.

INSTALLATION INSTRUCTIONS:

Lumengy Falcon lights comes with 3 mounting plates allowing you endless installation options, weather you need to light steps, walls, retaining walls, eves, or any outdoor down light.

UNDER-CAP INSTALLATION:

Run the wire behind the wall/step.
Place the Under cap mounting plate (come as default) on top of the wall/step and use the included PVC wire tube so that the wire will not be held by the cement or weight of the cap and the wires can move freely for future maintenance.
Use cement or masonry glue or screws to mount the plate.
Place the coping on top of the step light, making sure the light fixture is positioned flat and recessed below the cap/step.

WALL INSTALLATION:

Use the wall plate and drill 2 screws to mount the plate against the wall and make sure it’s level.
Run the wire into the wall or alongside and mount the light fixture to the wall plate and tighten the 2 screws.

CEILING APPLICATION:

Use the ceiling plate and mount it with 2 screws on the top surface.
Run the wire and assemble the light fixture to the ceiling.

REPLACEMENT:

With a 5-year warranty and a lifespan of 50,000 hours, you can have years of peace of mind.
If a light stops working, this design makes it easy to detach the light fixture from the mounting plate and replace it with a new one.

Remember to always consult an electrician and follow local and NEC codes for electrical safety.

Testing:

Take a 9V battery and check directly to the 2 wires connected to the fixture and see if the light turns on.
If it’s working, you may have wiring issues or not enough power from the transformer.
If it’s not working, remove the fixture from the mounting plate and pull the wire (we recommend using our PVC wire sleeve for easy wire movement under the step/cap).
Cut the 2 wires from the fixture and connect the new fixture to the same mounting plate.
Connect the fixture 2 wires to the existing 2 wires comes from the transformer
Light should be working now.

Shipping & Delivery

SHIPPING & DELIVERY

We process and ship orders Monday through Friday from multiple warehouses across the US.
Free expedited shipping is offered, with an estimated delivery time of 2-4 days.
For large orders, please allow an additional 3-4 days for delivery.
Multiple packages may be shipped for certain orders.
If you are planning to place a large order of 50 items or more, please contact us beforehand.
You can easily track your shipment and view your purchase history in your account section.
Shipping and tracking information will be emailed to you within 24 hours.
If you have any questions, please feel free to reach out to us.

ASK A QUESTION

If you have any questions about availability, installation, large order, special requirements, or just need some advice for your project, please fill up the form below and we will get back to you very shortly.

SKU: LMA-NEON-RED Category: Neon Lights Tag: Neon Light

Outdoor Hardscape Neon LED Strip Light, 12V AC/DC, IP67 Waterproof, 6 Feet With 12 Mounting Plates, Red Color

Reviews

INSTALLATION INSTRUCTIONS FOR FALCON LIGHTS