- Stunning Design – The Lumengy Paver Deck Lights series (patent pending) features a slim 0.5×9 (0.55 x 8.85 inches) size with a half-inch flange, or lip, around the light. This lip allows the fixture to seamlessly drop into various surfaces, such as wood and composite decks, tiles, pavers, and bricks, ensuring a flush, integrated look. The design adds sophistication and elegance to your outdoor space while providing glare-free, warm ambient light for enhanced safety and comfort. (color version is coming early 2025)
- Durable Construction – The Lumengy 0.5×9 Paver Deck Light features a stainless steel frame and LED light bar that can withstand tough conditions, including vehicular traffic. With its 18 efficient LEDs, it provides up to 50,000 hours of long-lasting illumination. (Brown Finish)
- Waterproof and Anti-Corrosion –Lumengy’s Paver Deck Light is IP67 rated for dustproofing and water resistance, making it ideal for installation in wet areas. The durable stainless steel construction and anti-rust paint layer ensure resistance to corrosion and reliable performance in tough conditions.
- Easy Installation – Lumengy Paver Deck Lights feature a 6-foot lead wire for easy connection to your main low-voltage line using waterproof wire connectors. The lights are designed for simple installation and replacement. The light can be dropped into place, and the built-in lip ensures it sits securely on the surface. For a more permanent installation, adhesive can be applied beneath the lip to hold the light firmly in position, providing a convenient solution for both installation and maintenance.
- Low Voltage – The Lumengy 12V Paver Deck Light is safe and easy to install and maintain, powered by a low-voltage 12V landscape transformer (not included). With a power consumption of only 0.9 watts, it emits 8 lumens of warm, glare-free light, providing an energy-efficient lighting solution for your outdoor area.
- 3-Year Warranty – Lumengy offers a 30-day return policy and a 3-year replacement service. Contact us for any replacement needs.
- Package includes – One Lumengy stainless steel paver deck light fixture with 6-foot low-voltage lead wire.
- Low Volt Transformer – This product requires a non-dimmable landscape 12v AC/DC transformer (not Included)
Deck & Paver Light 0.5×9 Inch 2700K For Driveway, Pathway, Patio & Garden, 12V Waterproof IP68, Drive-Over Rated, Brown Finish
$79.99
- Super slim design (patent pending)
- Fits perfectly in 9-inch spaces (fixture size 0.55×8.85 inches)
- Ideal for accent lighting on decks, patios, driveways, pathways, and more
- Solid stainless steel frame – Brown finish.
- 18 led’s for better light spread.
- Waterproof IP68
- 12V AC/DC/ 0.9w / 8lm
- 2700K Beautiful Warm White
- 3-Years Warranty
Fixture Size: 0.5x9 |
|
Fixture Color: Brown |
|
In stock
Weight | 0.9 lbs |
---|---|
Dimensions | 10 × 4 × 2.2 in |
Color Temperature |
2700K |
Quantity |
1 Pack |
Fixture Size |
0.5×9 |
Watts |
0.9 Watts |
Fixture Color |
Brown |
Fixture Material |
Stainless Steel |
Lumens |
8 Lumens |
Warranty |
3-Year Replacement Warranty |
Voltage |
12V AC/DC |
Waterproof Rating |
IP-68 |
Brand |
LUMENGY |
LUMENGY PAVER LIGHTS INSTALLATION INSTRUCTIONS
Before installing paver lights, you will need:
1. A 12V landscape transformer to power all your lights, with enough watts to support the total wattage of all your lights plus an additional 50% for efficiency. For example, if your lights have a total wattage of 100, purchase a 150W transformer.
2. Main low voltage cable, which runs from the transformer to the last light in your line. Use a thick cable, such as 10/2, 12/2, or 14/2 (10/2 is the thickest). Each paver light comes with a 6-foot lead wire to connect to the main line. If the lead wire is not long enough, use 16/2 or 14/2 wire to extend it to the main line.
3. Waterproof wire connectors or electrical tape to connect the lights to the main low voltage line.
Here are some steps to follow when installing paver lights
1. Plan the light placement before you start laying new pavers, and mark the location of the lights if you have existing pavers.
2. Remove the pavers where the lights will go, and lay wires along the path of the lights. Make sure to bury the wires under walls, and add sand or gravel under the fixtures to keep them secure.
3. Install the light fixtures in the holes where the pavers were removed, or dig new holes for the fixtures and wiring.
4. Connect the main low voltage line to each light using waterproof connectors. Then, connect the line to a low voltage landscape transformer (12V AC/DC).
5. Test the lights to ensure that they are working properly.
6. Fill the holes with dirt or sand and pack it down firmly to secure the lights both below and on the sides.
7. Enjoy the beautiful and energy-efficient lighting!
Replacement:
To replace the paver light, start by turning off the power supply to the circuit from the main breaker or switch. Gently remove the old paver light with a pry bar, being careful not to damage the surrounding pavers or the electrical cable. Next, cut the wire cable and connect a new light. Ensure that you add the necessary amount of sand beneath the new light to level it with the rest of the paver.
SHIPPING & DELIVERY
- We process and ship orders Monday through Friday from multiple warehouses across the US.
- Free expedited shipping is offered, with an estimated delivery time of 2-4 days.
- For large orders, please allow an additional 3-4 days for delivery.
- Multiple packages may be shipped for certain orders.
- If you are planning to place a large order of 50 items or more, please contact us beforehand.
- You can easily track your shipment and view your purchase history in your account section.
- Shipping and tracking information will be emailed to you within 24 hours.
- If you have any questions, please feel free to reach out to us.
If you have any questions about availability, installation, large order, special requirements, or just need some advice for your project, please fill up the form below and we will get back to you very shortly.
You may also like…
Related products
Paver Light 8×8 Inch, 2700K Brick Lighting For Pavers, Driveway, Pathway Patio, & Garden, 12V Waterproof IP67, Drive-Over Rated
In stock
$109.99Paver Light 6×12 Inch, 2700K Brick Lighting For Pavers, Driveway, Pathway Patio, & Garden, 12V Waterproof IP67, Drive-Over Rated
In stock
Paver Light 0.5×9 Inch 2700K Brick Lighting For Pavers, Driveway, Pathway Patio, & Garden, 12V Waterproof IP67, Drive-Over Rated
Out of stock
$49.99LED In-Ground Pavers Ambiance Lights, Ring Light Effect. Ideal for Decks, Driveways, Patios, Stainless Steel Color, 6-Pack
In stock
$179.99LED In-Ground Pavers Ambiance Lights, Ring Light Effect. Ideal for Decks, Driveways, Patios, Brown Color, 6-Pack
In stock
$179.99OUR BLOG
Lumengy Super Slim Hardscape Lights
- Posted by Josh P.
Lumengy Paver Light Manufacturing Process
- Posted by Josh P.
Lumengy’s 2024 Paver Lights Collection
- Posted by Josh P.
Crafting Custom Paver Lights with Lumengy
- Posted by Josh P.
Choose A Transformer For Your Landscape Lighting
- Posted by Josh P.
Brighten Your Driveway with Paver Lights
- Posted by Josh P.
Enhance Your Outdoor Areas with Pavers Lights
- Posted by Josh P.
Choose the Best Hardscape & Wall Lighting
- Posted by Josh P.
- 0 comments
Add Curb Appeal With Paver Lights
- Posted by Josh P.
- 0 comments
Unique Glowing Accent For Your Deck
- Posted by Josh P.
- 0 comments
3 ideas for using In-ground Lights
- Posted by Josh P.
- 0 comments
Reviews
There are no reviews yet.